Siemens Sinumerik 840D Operating Turning page 645
Hide thumbs
Also See for Sinumerik 840D:
- Function manual (920 pages) ,
- Diagnostics manual (714 pages) ,
- Operating manual (610 pages)
Advertisement
Complex programming example
12.
Insert another "Straight"-cycle into the program.
Press the VSK 2 "Straight", to open the input mask
for the function "Straight".
13.
Insert the following values into the parameter mask:
Confirm your inputs by pressing the VSK 8 "Accept".
The following program block is inserted into the pro-
gram:
14.
Insert now another "Straight"-cycle into the program.
Press the VSK 2 "Straight", to open the input mask
for the function "Straight".
15.
Insert the following values into the parameter mask:
Confirm your inputs by pressing the VSK 8 "Accept".
The following program block is inserted into the pro-
gram:
16.
Insert another "Straight"-cycle into the program.
Press the HSK 2.2 "Strght Circle" to select the func-
tion "Straight Circle".
The operating area for the function "Straight Circle"
opens.
Press the VSK 2 "Straight", to open the input mask
for the function "Straight".
840D/828D SINUMERIK Operate
Section 3
Notes
Advertisement
