Siemens Sinumerik 840D Operating Turning page 581

Hide thumbs Also See for Sinumerik 840D:

1 Brief description

Objective of the module:

Working through this module you become familiar with the technology "Milling" by programming two

ShopTurn programs.

Description of the module:

This module explains the programming of a simple milling program (multi-edged spigot) with Shop-

Turn functionality, as well as well as the programming of a more complex workpiece (rectangular

pocket) by means of a milling cycle and a chained position declaration.

840D/828D SINUMERIK Operate

This document was produced for training purposes.

Siemens assumes no responsibility for its contents.

Sinumerik 828d