Siemens Sinumerik 840D Operating Turning page 483

Simple programming example
Place the orange selection cursor on the tool
"3D_PROBE" by using the blue cursor keys on the
keyboard and press the VSK 1.1 „To program".
The program line N120 T="3D_PROBE"
is inserted into the program.
5 Insert the following G code commands into the pro-
gram:
N130 M6
N140 G0 X0 Y0 Z5
6. Program now the measuring cycle (CYCLE974).
Press the "Extend"-key on the operator panel in or-
der to switch to the horizontal softkey bar 2.
The horizontal softkey bar 2 opens.
Press the HSK 2.5 "Measurem. turning".
The operating area "Measurement turning" opens.
Press the VSK 4 "Workpiece measure".
A vertical softkey bar with functions for measuring
workpieces opens.
Press the VSK 2 "One-Point measurem.".
The input window for the technology "One-pt.meas./
CYCLE974" opens.
7. Insert the following values into the parameter win-
dow:
Confirm your inputs with pressing the VSK 8 "OK".
840D/828D SINUMERIK Operate
Section 2
Notes