Siemens Sinumerik 840D Operating Turning page 418

Hide thumbs Also See for Sinumerik 840D:

Complex programming example

Program the following lines and end the program:

N310 REPEATB HOLES

N340 G0 X200 Z200

Start the simulation of the program.

Press the HSK 1.7 "Simulation" to open the simula-

tion window.

The control calculates the simulation and shows the

simulation in a side view.

To see the simulation of the machining from the front

of the blank, press the VSK 1.4 "Face view".

840D/828D SINUMERIK Operate

Sinumerik 828d