Siemens Sinumerik 840D Operating Turning page 531

Various
By pressing the VSK 6 "Teach angle off.", the angle
offset of the main spindle in relation to the counter-
spindle is saved.
Note:
This softkey is only visible if the first parameter in the
couterspindle parameter window is set to "Gripping"
or "Complete".
You can also set the angle offset of the spindles by
hand, with filling out the parameter field "α1".
By pressing the VSK 7 "Cancel", the values you
have entered in the parameter window will be dis-
carded.
By pressing the VSK 8 "Accept" you confirm your
inputs.
5.4.3 Parameters for counterspindle "Complete"
Parameter Meaning
Grip:
Coordinate system
The park position is entered into the machine coordi-
Machine
nate system. Teaching of the park position and the
(MCS)
angular offset is possible.
The park position is entered into the workpiece coor-
Workpiece
dinate system.
(WCS)
Parking position Besides the option to set the parking position of the
tool tool with the parameters "XP" and "ZP" in the pa-
rameter mask directly, you can also save the actual
position of the tool as the parking position by press-
ing the VSK 5 "Teach park pos.".A prerequisite is,
that for gripping the parameter "Machine" is selected.
XP (mm) Park position of the
tool in X-direction
(abs).
ZP (mm) Park position of the
tool in Z-direction
(abs).
840D/828D SINUMERIK Operate
Help picture/animation
Section 5
Notes