Download Print this page

Siemens Sinumerik 840D Operating Turning page 574

Hide thumbs Also See for Sinumerik 840D:

Advertisement

Section 3
Notes
B610
B610
Complex programming example
3.1 Example: Hole pattern
The following program is to be programmed.
Create a new ShopTurn program, like described in section 2.1 in this
module.
Give the program a name, for example "ST_DRILLING_2.MPF".
The program with the parameter mask for the program header opens.
1.
Program the program header by entering the follow-
ing values:
Page 8
840D/828D SINUMERIK Operate

Advertisement

loading

This manual is also suitable for:

Sinumerik 828d