Siemens Sinumerik 840D Operating Turning page 473

Hide thumbs Also See for Sinumerik 840D:

Complex programming example

Program the following G code commands:

N310 G96 S300 M4

Insert now a "Groove" cycle (CYCLE930) into the

Press the VSK 2 "Groove".

The work area for the technology "Groove" opens.

Press the VSK 4 "Groove 2", to open the input mask

for the cycle "Groove 2".

Insert the values into the parameter mask like dis-

played below:

Confirm your inputs by pressing the VSK 8 "Accept".

The following line will be inserted into the program:

N320 CYCLE930(60,-45,6.23673,8,5,,0,10,10,

1,1,1,1,0.2,2,1,10130,,1,30,0.15,1,0.1,0.1,2,10)

Program the following G code line:

N330 G0 X200 Z200

Insert a new tool (FINISHING_TOOL_35) into the

Press the VSK 1.1 "Select tool".

The tool list window opens.

Mark the desired tool (FINISHING_TOOL_35) in the

tool list window with the orange selection cursor.

840D/828D SINUMERIK Operate

Sinumerik 828d