Table of Contents
Advertisement
MX2008 Chassis
IN THIS SECTION
MX2008 Chassis Description | 27
MX2008 Backplane Description | 33
MX2008 Component Redundancy | 34
MX2008 Field-Replaceable Units | 38
MX2008 Router Hardware Components and CLI Terminology | 40
MX2008 Craft Interface Description | 43
MX2008 Alarm Relay Contacts on the Craft Interface | 45
MX2008 Alarm LEDs and Alarm Cutoff/Lamp Test Button | 45
MX2008 Component LEDs on the Craft Interface | 47
MX2008 Cable Manager Description | 50
MX2008 Rack-Mounting Hardware | 53
MX2008 Chassis Description
The router chassis is a rigid sheet metal structure that houses all the other router components (see
Figure 1 on page
29,
Figure 2 on page
Platform with standard cable managers and EMI cover measures 42 in. (106.68 cm) high, 19 in. (48.26 cm)
wide, and 30.90 in. (78.49 cm) deep (from the front-mounting flanges to the rear of the chassis). An
extended cable manager extends the total depth to 36.82 in. (93.53 cm). The chassis can be installed in
a standard 19-in. open-frame or four-post rack, or an enclosed cabinet.
NOTE:
There must be a minimum of 24 rack units (U) of usable rack space when installing the
MX2008 router into a rack.
NOTE:
If you are installing the MX2008 router into a network cabinet, make sure that no
hardware, device, rack, or cabinet component obstructs the 24 U rack space from access during
installation.
30, and
Figure 3 on page
31). The MX2008 Universal Routing
27
Advertisement
Table of Contents
