Table of Contents
Advertisement
Connecting the MX2008 to the Network
IN THIS SECTION
Tools and Parts Required for MX2008 Router Connections | 339
Connecting the Alarm Relay Wires to the MX2008 Craft Interface | 340
Disconnecting the Alarm Relay Wires from the MX2008 Craft Interface | 341
Connecting MPC or MIC Cables to the MX2008 Router | 342
Tools and Parts Required for MX2008 Router Connections
To connect the router to management devices and MPCs, you need the following tools and parts:
Phillips (+) screwdrivers, numbers 1 and 2
2.5 mm flat-blade (–) screwdriver
2.5 mm Phillips (+) screwdriver
Wire cutters
Electrostatic discharge (ESD) grounding wrist strap
SEE ALSO
MX2008 Chassis Description | 27
MX2008 Field-Replaceable Units | 38
Unpacking the MX2008 Router Overview | 231
339
Advertisement
Table of Contents
