Table of Contents
Advertisement
NOTE:
Additional grounding is provided to an AC-powered router when you plug its PDMs into
grounded AC power receptacles.
CAUTION:
wiring must be shielded, and the shield for the wiring must be grounded at both ends.
WARNING:
protective earthing terminal (Metric [–M6] and English [–¼-20] screw ground lugs)
provided on the chassis in addition to the grounding pin of the power supply cord. This
separate protective earth terminal must be permanently connected to earth.
SEE ALSO
Grounding an MX2008 Router | 298
Preventing Electrostatic Discharge Damage to an MX2008 Router | 544
MX2008 Site Preparation Checklist
The checklist in
Table 88 on page 206
router installation.
Table 88: MX2008 Site Preparation Checklist
Item or Task
Environment
Verify that environmental
factors such as temperature
and humidity do not exceed
router tolerances.
Power
To comply with intrabuilding lightning and surge requirements, intrabuilding
The router is installed in a restricted-access location. It has a separate
summarizes the tasks you must perform when preparing a site for
For More Information
"MX2008 Router Environmental
Specifications" on page 202
Performed By
Date
206
Advertisement
Table of Contents
