Juniper MX2008 Hardware Manual page 235

NOTE: If you ordered a router transport kit, see
Kit" on page 237
12. Save the shipping crate cover, pallet, and packing materials in case you need to move or ship the router
at a later time.
SEE ALSO
Installing the MX2008 Router Using a Pallet Jack with Attachment | 261
Installing an MX2008 Router Using a Router Transport Kit Overview | 265
Verifying the MX2008 Parts Received
A packing list is included in each shipment. Check the parts in the shipment against the items on the packing
list. The packing list specifies the part numbers and descriptions of each part in your order.
If any part is missing, contact a customer service representative.
A fully configured router contains the router chassis with installed components, listed in
Table 100 on page 235, and an accessory box, which contains the parts listed in
parts shipped with your router can vary depending on the configuration you ordered.
Table 100: Parts List for a Fully Configured MX2008 Router
Component
Chassis, including backplane, and craft interface.
EMI cover
Four-post mounting shelf
Open-frame mounting shelf (optional)
MPCs
Adapter cards
for instructions on how to unpack and install the router transport kit.
"Unpacking the MX2008 Router Transport
Quantity
1
1
1
1
Up to 10
Up to 10
Table 101 on page 236. The
235