Table of Contents
Advertisement
Figure 100: Installing Winch Mount Bracket to Rack Rails
4. Adjust the height of the router by turning the handles clockwise until the router transport platform is
aligned with the surface of the mounting shelf and slightly higher than the mounting shelf (see
Figure 101 on page
275).
NOTE:
Make sure the bubbles within the T-shaped levels are between the lines, indicating
that the router is level.
5. Adjust the four leveling mounts on the router transport platform until all four leveling mounts rest
firmly on the ground (see
Figure 101 on page
275).
274
Advertisement
Table of Contents
