Table of Contents
Advertisement
Figure 72: MX2008 Shipping Crate Dimensions (Larger)
NOTE:
The router is maximally protected inside the shipping crate. Do not unpack it until you
are ready to begin installation.
To unpack the router:
1. Move the shipping crate to an electrostatic discharge (ESD) approved staging area as close to the
installation site as possible, where you have enough room to remove the components from the chassis.
While the chassis is bolted to the shipping pallet, you can use a forklift or pallet jack to move it.
2. Position the shipping crate with the arrows pointing up.
3. Open all the latches on the shipping crate.
4. Remove the front door of the shipping crate and set it aside (see
5. Using a two-person team, slide the remainder of the shipping crate off the pallet.
6. Remove the foam covering the top of the router.
Figure 73 on page
234).
233
Advertisement
Table of Contents
