Table of Contents
Advertisement
RELATED DOCUMENTATION
DC Power Electrical Safety Warnings for Juniper Networks Devices | 576
General Electrical Safety Guidelines and Electrical
Codes for Juniper Networks Devices
Install the router in compliance with the following local, national, or international electrical codes:
United States—National Fire Protection Association (NFPA 70), United States National Electrical Code.
Canada—Canadian Electrical Code, Part 1, CSA C22.1.
Other countries—International Electromechanical Commission (IEC) 60364, Part 1 through Part 7.
Locate the emergency power-off switch for the room in which you are working so that if an electrical
accident occurs, you can quickly turn off the power.
Do not work alone if potentially hazardous conditions exist anywhere in your workspace.
Never assume that power is disconnected from a circuit. Always check the circuit before starting to
work.
Carefully look for possible hazards in your work area, such as moist floors, ungrounded power extension
cords, and missing safety grounds.
Operate the router within marked electrical ratings and product usage instructions.
For the router and peripheral equipment to function safely and correctly, use the cables and connectors
specified for the attached peripheral equipment, and make certain they are in good condition.
Many router components can be removed and replaced without powering off or disconnecting power to
the router. Never install equipment if it appears damaged.
RELATED DOCUMENTATION
In Case of an Electrical Accident | 567
572
Advertisement
Table of Contents
