Table of Contents
Advertisement
CAUTION:
on the MIC.
5. Push the MPC6E ejector lever in the direction opposite to the arrow, to return the ejector lever to its
original position. The ejector lever no longer blocks access to the adjacent MPC.
SEE ALSO
MPC6E
Replacing an MX2008 MIC | 378
Replacing an MX2010 MIC
Replacing an MX2020 MIC
MIC/MPC Compatibility
SEE ALSO
Preventing Electrostatic Discharge Damage to an MX2008 Router | 544
MX2008 Modular Interface Card Description | 172
Troubleshooting the MX2008 MICs | 511
Replacing an MX2008 MPC
IN THIS SECTION
Removing an MX2008 MPC with Adapter Card | 390
Removing an MX2008 MPC from the Adapter Card | 392
Removing an MX2008 Adapter Card | 395
Installing an MX2008 Adapter Card | 396
Installing an MX2008 MPC into an Adapter Card | 398
Slide the MIC straight into the slot to avoid damaging the components
389
Advertisement
Table of Contents
