Table of Contents
Advertisement
Installing an MX2008 Router Overview
To install the MX2008 router:
1. Prepare your installation site. See:
Preparing the Site for the MX2008 Router Overview
2. Review the safety guidelines. See:
General Safety Guidelines for Juniper Networks Devices on page 539
3. Unpack the router and verify the parts. See:
Unpacking the MX2008 Router on page 231
Verifying the MX2008 Parts Received on page 235
Unpacking the MX2008 Router Transport Kit on page 237
4. Install the mounting hardware. See:
Installing the MX2008 Mounting Hardware for a Four-Post Rack or Cabinet on page 241
5. Remove all components. See:
Removing Components from the MX2008 Router Chassis Before Installing It in a Rack on page 245
6. Install the router into the rack. See:
Installing an MX2008 Router Using a Pallet Jack Overview on page 259
Installing an MX2008 Router Using a Router Transport Kit Overview on page 265
7. Ground the router. See
Grounding an MX2000 Router
Grounding an MX2008 Router on page 298
8. Reinstall all components. See:
Reinstalling Components in the MX2008 Router After Initially Installing the Router in a Rack on
page 284
9. Connect cables to the network and external devices. See:
Connecting the MX2008 Router to Management and Alarm Devices.
10. Connect the AC power cord or DC power cables. See:
Connecting AC Power to an MX2000 Router with Three-Phase Wye AC Power Distribution Modules
on page 311
Connecting AC Power to an MX2008 Router with Three-Phase Delta AC Power Distribution Modules
on page 306
"Grounding an MX2008 Router" on page
298.
229
Advertisement
Table of Contents
