Table of Contents
Advertisement
8. Observe the status LEDs on the PDM faceplate. If the PDM is correctly installed and functioning
normally, the LEDs light green steadily.
9. On each of the DC PSMs, move the switch to the on (|) position.
SEE ALSO
Powering Off the DC-Powered MX2000 Router
MX2008 Router DC (240 V China) System Electrical Specifications | 118
Troubleshooting the MX2000 Router Power System | 495
Preventing Electrostatic Discharge Damage to an MX Series Router
Maintaining Cables That Connect to MX2008 MPCs
or MICs
Purpose
For optimum router performance, verify the condition of the cables that connect to the MPCs or MICs.
Action
485
Advertisement
Table of Contents
