Table of Contents
Advertisement
Varning! Denna varningssymbol signalerar fara. Du befinner dig i en situation som kan
leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten
om farorna med elkretsar och känna till vanligt förfarande för att förebygga skador.
RELATED DOCUMENTATION
General Safety Warnings for Juniper Networks Devices | 540
Installation Safety Warnings for Juniper Networks Devices | 547
Maintenance and Operational Safety Warnings for Juniper Networks Devices | 559
General Electrical Safety Warnings for Juniper Networks Devices | 567
DC Power Electrical Safety Warnings for Juniper Networks Devices | 576
General Safety Guidelines for Juniper Networks
Devices
The following guidelines help ensure your safety and protect the hardware equipment from damage. The
list of guidelines might not address all potentially hazardous situations in your working environment, so
be alert and exercise good judgment at all times.
Perform only the procedures explicitly described in this documentation. Make sure that only authorized
service personnel perform other system services.
Keep the area around the chassis clear and free from dust before, during, and after installation.
Keep tools away from areas where people could trip over them while walking.
Do not wear loose clothing or jewelry, such as rings, bracelets, or chains, that could become caught in
the chassis.
Wear safety glasses if you are working under any conditions that could be hazardous to your eyes.
Do not perform any actions that create a potential hazard to people or make the equipment unsafe.
Never attempt to lift an object that is too heavy for one person to handle.
Never install or manipulate wiring during electrical storms.
Never install electrical jacks in wet locations unless the jacks are specifically designed for wet
environments.
Operate the hardware equipment only when the chassis is properly grounded.
539
Advertisement
Table of Contents
