Table of Contents
Advertisement
3. Loosen the two captive screws that secure the PSM to the chassis. While grasping the handle on the
PSM faceplate with one hand, use your other hand to guide the PSM.
4. Pull the PSM straight out of the chassis.
CAUTION:
damaged.
CAUTION:
component on an antistatic mat resting on a stable, flat surface.
Figure 82: Removing a AC Power Supply Module Before Installing the MX2010 Router
D
Do not touch the power connector on the back of the PSM. It can get
Do not stack PSMs on one another after you remove them. Place each
250
Advertisement
Table of Contents
