Table of Contents
Advertisement
Figure 95: Preparing the Router Transport Kit for Installation
5. Remove the four shipping brackets that secure the router to the shipping crate platform using a
9/16-in. (14 mm) socket wrench, and a number 2 Phillips screwdriver, and set the brackets aside.
6. Align the left router transport mounting plate and wheel assembly (indicated by left arrow) with the
holes on the left side of the chassis (see
7. Using a number 3 Phillips screwdriver, tighten the captive screws to secure the router transport mounting
plate and wheel assembly to the chassis.
8. Align the right router transport mounting plate and wheel assembly (indicated by right arrow) with the
holes on the right side of the chassis (see
9. Using a number 3 Phillips screwdriver, tighten the captive screws to secure the router transport mounting
plate and wheel assembly to the chassis.
Figure 96 on page
269).
Figure 96 on page
269).
268
Advertisement
Table of Contents
