Table of Contents
Advertisement
Figure 155: Removing the Extended EMI Card-Cage Cover
Installing the MX2008 Extended EMI Cover
The extended electromagnetic interference (EMI) covers attaches to the router over the card cage.
1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to
one of the ESD points on the chassis.
2. On each side of the card cage, orient the extended EMI cover's mounting brackets so that they line up
with the mounting holes. The groove that holds the points on the cover should be at the top.
3. Using a number 2 Phillips (+) screwdriver, secure the extended EMI cover mounting brackets to the
sides of the card cage by using the four screws provided (two on each side) (see
Figure 156 on page
368).
367
Advertisement
Table of Contents
