Juniper MX2008 Hardware Manual page 352

Table 109: Tools and Parts Required for Component Replacement (continued)
Components
MIC
Routing Engine and Control Board
(RCB)
SFB
Serial cable to Auxiliary or Console
Routing Engine port
PSM air filter
Card-cage air filter
Air filter (lower)
SEE ALSO
MX2008 Field-Replaceable Units | 38
Replacing the MX2008 Craft Interface | 358
Replacing an MX2008 Fan Tray | 374
Replacing the MX2008 Air Filters | 369
Tool or Part
Phillips (+) screwdrivers, numbers 1 and 2
Rubber safety cap for fiber-optic MICs
Flat-blade (–) screwdriver
Electrostatic bag or antistatic mat
Blank panels (if component is not reinstalled)
Phillips (+) screwdrivers, numbers 1 and 2
Electrostatic discharge (ESD) grounding wrist strap
Blank panels (if component is not reinstalled)
Phillips (+) screwdrivers, numbers 1 and 2
Electrostatic discharge (ESD) grounding wrist strap
Blank panels (if component is not reinstalled)
Flat-blade (–) screwdriver
Phillips (+) screwdrivers, numbers 1 and 2
Phillips (+) screwdrivers, numbers 1 and 2
Phillips (+) screwdrivers, numbers 1 and 2
352