Juniper MX2008 Hardware Manual page 184

Universal routing platform

Hide thumbs Also See for MX2008:

Table of Contents

MX2008 Ports and Interfaces

In the physical part of the interface name, a hyphen (-) separates the media type from the MPC number

(represented as an FPC in the CLI), and a slash (/) separates the logical PIC and port numbers:

type-fpc/pic/port

type—Media type, which identifies the network device. For example:

ge—Gigabit Ethernet interface

so—SONET/SDH interface

xe—10-Gigabit Ethernet interface

For a complete list of media types, see Interface Naming Overview.

fpc—Slot in which the MPC is installed. On the MX2008 router, the MPCs are represented in the CLI as

FPC 0 through FPC 9.

pic—Logical PIC on the MIC. The number of logical PICs varies depending on the type of MIC.

port—Port number.

The MIC number is not included in the interface name.

The MX2008 supports up to ten MPCs that install vertically and are numbered from left to right.

The following sample CLI output displays an MPC (MPCE Type 2 3D) installed in MPC slot 9.

user@host> show chassis hardware

MRATE-12xQSFPP-XGE-XLGE-CGE