Juniper MX2008 Hardware Manual page 266

Universal routing platform

Hide thumbs Also See for MX2008:

Table of Contents

Installing an MX2008 Router Overview | 229

Tools Required to Install the MX2008 Router Using a Router Transport Kit

To install the router by using a router transport kit, you need the following tools and equipment:

Router transport kit (model number MX2K-TRNSPRT-KIT)

Front component shipping cover

Rear component shipping cover

Phillips (+) screwdrivers, numbers 1, 2, and 3

1/2-in. (12.7 mm) drive ratchet

1/4-in. (6.35 mm) torque-controlled driver or socket wrench to tighten the nuts on the router transport

1-1/8-in. (28.57 mm) torque-controlled driver or socket wrench to tighten the router transport kit winch

9/16-in. or 14-mm open-end or socket wrench with extension to remove bracket bolts from the shipping

Electrostatic discharge wrist strap

Antistatic mat

The router transport kit does not come with the router. You need to purchase the router

transport kit from Juniper Networks. Using the router mounting kit for installing the MX2008

is optional.