Juniper MX2008 Hardware Manual page 284

SEE ALSO
MX2008 Rack Requirements | 198
MX2008 Router Transport Kit Moving Requirements and Guidelines | 189
Installing an MX2008 Router Using a Router Transport Kit Overview | 265
Grounding an MX2008 Router | 298
Reinstalling Components in the MX2008 Router After Initially Installing
the Router in a Rack
After the router is installed in the rack, remove the shipping covers, and reinstall the removed components
before booting and configuring the router. You reinstall components first in the rear of the chassis, and
then in the front:
Reinstalling the Power Distribution Modules After Installing the MX2010 Router with a Pallet
1.
Jack | 285
Reinstalling the Power Supply Modules After Installing the MX2010 Router with a Pallet Jack | 288
2.
Reinstalling the Fan Trays After Installing the MX2010 Router with a Pallet Jack | 290
3.
Reinstalling the SFBs After Installing the MX2010 Router with a Pallet Jack | 292
4.
Reinstalling the Adapter Card After Installing the MX2010 Router with a Pallet Jack | 293
5.
Reinstalling the MPCs After Installing the MX2010 Router with a Pallet Jack | 294
6.
Reinstalling the CB-REs After Installing the MX2010 Router with a Pallet Jack | 295
7.
284