Juniper MX2008 Hardware Manual page 245

Figure 78: Center-Mounting Bracket Removal
SEE ALSO
MX2008 Rack-Mounting Hardware | 53
MX2008 Rack Requirements | 198
Removing Components from the MX2008 Router Chassis Before Installing
It in a Rack
Before installing the router with a pallet jack, you must first remove shipping covers and components from
the chassis. With components removed, the chassis weighs approximately 324 lb (146.96 kg).
CAUTION:
to any other part of the chassis can cause damage.
Removing the Power Distribution Modules Before Installing an MX2010 Router with a Pallet Jack | 246
1.
Removing the Power Supply Modules Before Installing an MX2010 Router | 249
2.
Removing the Fan Trays Before Installing an MX2010 Router with a Pallet Jack | 252
3.
Removing the SFBs Before Installing an MX2010 Router with a Pallet Jack | 254
4.
Removing the MPCs with Adapter Card Before Installing an MX2010 Router with a Pallet Jack | 255
5.
The shipping covers help guide the chassis into the rack. Applying force
245