Table of Contents
Advertisement
Installing the Router Transport Kit on the MX2008
NOTE:
The router transport kit is optional and can be purchased from Juniper Networks.
The router transport kit includes the following components:
Router transport platform
Router transport left and right mounting plates with adjustable wheel assembly
Router winch mount with winch strap plate
To install the router transport kit:
1. Remove the router transport kit from the shipping crate (see
Kit" on page
237).
NOTE:
The router transport kit weighs approximately 138.5 lb (62.82 kg).
2. Remove the winch strap plate that is secured to the winch mount by using a 9/16-in. (14 mm) socket
wrench, and set the plate aside.
3. Using a number 3 Phillips screwdriver, loosen the captive screws that secure the winch mount to the
router transport kit, and set the mount aside.
4. Using a number 3 Phillips screwdriver, loosen the captive screws that secure the router transport
mounting plate and wheel assembly (left and right) to the router transport platform, and set them aside
(see
Figure 95 on page
268).
"Unpacking the MX2008 Router Transport
267
Advertisement
Table of Contents
