Table of Contents
Advertisement
15. Use the provided plastic cable tie to fasten the AC power cord to the PDM.
16. Verify that the AC power cord is not touching or blocking access to router components, and that it
does not drape where people could trip on it.
17. Repeat the procedure for the other three-phase wye AC PDMs.
SEE ALSO
MX2000 Three-Phase Wye AC Power Distribution Module Description
MX2000 Three-Phase Delta AC Power Distribution Module Description
Mapping Input Power from AC Power Distribution Modules to AC Power Supply Modules on MX2000 Routers
MX2000 AC Power System Electrical Specifications
MX2000 AC Power Cord Specifications
Prevention of Electrostatic Discharge Damage
Connecting Power to an MX2000 Single-Phase AC Power Distribution
Module
CAUTION:
same router.
NOTE:
The MX2008, MX2010, and MX2020 routers support the same power modules (AC/DC
PSMs and AC/DC PDMs).
Do not mix AC and DC power distribution modules (PDMs) within the
315
Advertisement
Table of Contents
