Table of Contents
Advertisement
RELATED DOCUMENTATION
General Safety Guidelines for Juniper Networks Devices | 539
General Safety Warnings for Juniper Networks Devices | 540
General Electrical Safety Warnings for Juniper Networks Devices | 567
DC Power Electrical Safety Warnings for Juniper Networks Devices | 576
Installation Safety Warnings for Juniper Networks
Devices
IN THIS SECTION
Intrabuilding Ports Warning | 547
Installation Instructions Warning | 548
Rack-Mounting Requirements and Warnings | 548
Ramp Warning | 553
Observe the following warnings before and during hardware equipment installation:
Intrabuilding Ports Warning
WARNING:
connection to intrabuilding or unexposed wiring or cabling only. The intrabuilding ports
of the equipment or subassembly MUST NOT be metallically connected to interfaces
that connect to the Outside Plant (OSP) or its wiring. These interfaces are designed
for use as intrabuilding interfaces only (Type 2 or Type 4 ports as described in GR-1089)
and require isolation from the exposed OSP cabling. The addition of Primary Protectors
is not sufficient protection in order to connect these interfaces metallically to OSP
wiring.
The intrabuilding ports of the equipment or subassembly are suitable for
547
Advertisement
Table of Contents
