Juniper MX2008 Hardware Manual page 209

NOTE: There are no additional clearance requirements to accommodate the depth of the
MX2008 power distribution modules (PDMs) and power supply modules (PSMs); they are
within specification.
An MX2008 router with an extended cable manager requires extra clearance to accommodate the depth
of 40.15 in. (102 cm).
Figure 67: Chassis Dimensions and Clearance Requirements for the MX2008 Router with the Standard
Cable Manager
36.0 in.
(91.44 cm)
Clearance
required
Front
19.0 in.
(48.3 cm)
Standard cable
manager
Front mounting
flange
Figure 68: Chassis Dimensions and Clearance Requirements for the MX2008 Router with the Extended
Cable Manager
36" (91.44 cm)
clearance required
Front
19 in 19.2 in
(48.3 cm) (48.8 cm)
Cable manager
Front-mounting flange
34.53 in.
(90.7 cm)
Center mounting
flange
Top view
12.0 in.
(30.5 cm)
33.5 in.
(85.1 cm)
36.20"
(91.95 cm)
33.50"
(85.1 cm)
36.0 in.
(91.44 cm)
Clearance
recommended
Rear
17.5 in.
(44.45 cm)
36" (91.44 cm)
clearance recommended
Rear
17.5"
(44.45 cm)
209