Juniper MX2008 Hardware Manual page 272

SEE ALSO
Preparing the Site for the MX2008 Router Overview
Installing an MX2008 Router Overview | 229
Using the Router Transport Kit to Install the MX2008 Router in a Four-Post
Rack
Because of the router's size and weight—up to 985 lb (446.79 kg) depending on the configuration—we
recommend that you use a router transport kit to install the router. The router transport kit does not come
with the router. You need to purchase the router transport kit from Juniper Networks. Using the router
mounting kit for installing the MX2008 is optional.
NOTE: Four people are needed to install the router into a rack.
CAUTION:
verify that the rack is strong enough to support the router's weight and is adequately
supported at the installation site.
Before front mounting the router in a rack, have a qualified technician
272