Table of Contents
Advertisement
Figure 104: Pulling the MX2008 into the Rack
NOTE:
A four-person team is needed to carefully guide the router into the rack while operating
the winch.
If the router is not pulled all the way into the rack by the winch mechanism, grasp the
handles on the shipping covers and carefully slide the router onto the mounting shelf until
the front-mounting flanges contact the rack rails. You must remove the winch bracket to
perform this procedure.
There must be a minimum of 24-U of usable rack space when installing the MX2008 into
a 24-U rack.
11. Remove the router transport platform, and set the platform aside.
278
Advertisement
Table of Contents
