Table of Contents
Advertisement
The cable lugs attach to the terminal studs of each PDM (see
Figure 47 on page
121).
NOTE:
The MX2008 supports 4-AWG DC power cable lugs for 80-A input, and 6-AWG DC
power cable lugs for 60-A input.
Figure 46: 4-AWG DC Power Cable Lug
End view
0.27
0.55
2 holes
0.09
0.25
0.63
Figure 47: 6-AWG DC Power Cable Lug
End view
.48 ±.04
.25 ±.04
CAUTION:
lug to the grounding and power cables that you supply. A cable with an incorrectly
attached lug can damage the router.
CAUTION:
location. It has a separate protective earthing terminal (Metric [–M6] and English
[–¼-20] screw ground lugs) provided on the chassis in addition to the grounding pin
of the power supply cord. This separate protective earth terminal must be permanently
connected to earth.
Inner diameter .28
All measurements in inches
Inner diameter .22
0.63 ±.02
.27 ±.02
2 PLC
All measurements in inches
Before router installation begins, a licensed electrician must attach a cable
The router is a pluggable type A equipment installed in restricted access
Figure 46 on page 121
and
121
Advertisement
Table of Contents
