Table of Contents
Advertisement
Figure 168: Removing an MPC from the Adapter Card
Removing an MX2008 Adapter Card
An adapter card weighs up to 15 lb (6.80 kg). Be prepared to accept its full weight.
NOTE:
Steps involved to remove or install an MPC are the same for MX2008, MX2010, and
MX2020 routers.
To remove an adapter card:
1. Have ready a replacement adapter card and an antistatic mat for the adapter card.
2. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to
one of the ESD points on the chassis.
To take the MPC offline, see
3. Issue the following CLI command to take the adapter card offline:
user@host>request chassis adc slot slot-number offline
4
"Removing an MX2008 MPC from the Adapter Card" on page
395
392.
Advertisement
Table of Contents
