Juniper MX2008 Hardware Manual page 259

Reinstalling the CB-REs After Installing the MX2010 Router with a Pallet Jack | 295
SEE ALSO
Preventing Electrostatic Discharge Damage to an MX2008 Router | 544
Preparing the Site for the MX2008 Router Overview
Reinstalling Components in the MX2008 Router After Initially Installing the Router in a Rack | 284
Installing an MX2008 Router Using a Pallet Jack Overview
1. Gather the tools required to install the router. See:
"Tools Required to Install the MX2008 Router Using a Pallet Jack" on page
2. Install the pallet jack attachment. See:
"Installing the Pallet Jack Attachment" on page
3. Install the MX2008. See:
"Installing the MX2008 Router Using a Pallet Jack with Attachment" on page
SEE ALSO
Installing an MX2008 Router Overview | 229
Installing an MX2008 Router Using a Router Transport Kit Overview | 265
Tools Required to Install the MX2008 Router Using a Pallet Jack
To install the router, you need the following tools and equipment:
Standard pallet jack (not provided)
Pallet jack attachment—MX2000-PLLT-JCK-ADPTR
Front component shipping covers
Rear component shipping covers
Phillips (+) screwdrivers, numbers 1, 2, and 3
260.
259.
261.
259