Table of Contents
Advertisement
NOTE:
The fan tray has a double-locking safety mechanism that allows you to safely install
the fan tray in a two-stage process.
7. Tighten the two captive screws on the fan tray faceplate.
8. Close the access panel and secure the two captive screws on either side of the access panel.
9. Reinstall the DC cable manager back into position, if necessary.
Figure 163: Installing Fan Trays
SEE ALSO
Preventing Electrostatic Discharge Damage to an MX2008 Router | 544
MX2008 Cooling System Description | 54
377
Advertisement
Table of Contents
