Juniper MX2008 Hardware Manual page 210

NOTE: There must be a minimum of 24-U of usable rack space when you install the MX2008
router.
SEE ALSO
MX2008 Rack Requirements | 198
MX2008 Rack-Mounting Hardware | 53
MX2008 Cabinet Size and Clearance Requirements | 193
MX2008 Cabinet Airflow Requirements | 192
MX2008 Network Cable and Transceiver Planning
IN THIS SECTION
Calculating Power Budget and Power Margin for Fiber-Optic Cables | 210
CB-RE and RCB Interface Cable and Wire Specifications for MX Series Routers | 213
Fiber-Optic Cable Signal Loss, Attenuation, and Dispersion | 214
Calculating Power Budget and Power Margin for Fiber-Optic Cables
Use the information in this topic and the specifications for your optical interface to calculate the power
budget and power margin for fiber-optic cables.
TIP: You can use the
transceivers supported on your Juniper Networks device.
Hardware Compatibility Tool to find information about the pluggable
210