Table 5: Rear Components in a Fully Configured DC-Powered MX2008 Router (continued)
Component No.
Component Description
3
PSM air filter
4
DC PDM
5
Fan tray air filter
6
Fan trays (two)
NOTE:
Remove field replacement units (FRUs) from the rear of the MX2008 router before you
install the router.
The MX2008 router has two ESD points. These are located on either side of the MPCs on the front of the
chassis (see
Figure 4 on page
Figure 4: MX2008 Router ESD Points
Slots
–
PDM0/Input0
–
Fan tray 0 and fan tray 1
(behind access door)
32).
Number of FRUs
1
1
1
2
32