Table 20: Supported MX2008 Power System Components
Name
DC PSM
Nine-feed DC PDM
Seven-feed DC PDM
AC PSM
Three-phase delta AC PDM
Three-phase wye AC PDM
Nine-feed single-phase AC PDM
Seven-feed single-phase AC PDM
NOTE:
Routers configured with AC or DC PDMs and PSMs are shipped with blank panels
installed.
NOTE:
To avoid triggering any PSM-related or power-related alarms for the PSMs that are not
used but still plugged into the MX2008 router, make sure that you:
Do not connect external power feeds to the PSM through the PDM.
Move the DIP switch on the PSMs to the off position.
Turn off the PSM by using its ON/OFF switch.
SEE ALSO
MX2008 DC Power Supply Module (-48 V) Description | 100
MX2008 DC Power Distribution Module (-48 V) Description | 96
MX2008 AC Power Requirements | 74
MX2008 DC Power Requirements | 105
Model Number
MX2000-PSM-DC
MX2000-PDM-DC
MX2K-PDM-OP-DC
MX2000-PSM-AC
MX2000-PDM-AC-DELTA
MX2000-PDM-AC-WYE
MX2K-PDM-AC-1PH
MX2K-PDM-OP-AC
First Junos OS Release
Supported
15.1F7 and later
15.1F7 and later
15.1F7 and later
15.1F7 and later
15.1F7 and later
15.1F7 and later
15.1F7 and later
15.1F7 and later
62