Shipment For Service; Safety Symbols - Keysight CalPod 855 A Series Service Manual

Safety and Regulatory Information
Maintenance
Maintenance
To remove dirt or dust from the external case of the Keysight products, clean the
case using a dry or slightly-dampened cloth only.
If alcohol is used to clean the connectors, the power cord to the instrument must
be removed. All cleaning should take place in a well ventilated area. Allow
adequate time for the fumes to disperse and moist alcohol to evaporate prior to
energizing the instrument.

Shipment for Service

Contact Keysight Technologies for instructions on where to ship the Keysight
products for service. Refer to
Ship the Keysight products using the original packaging materials. Shipping the
Keysight products in anything other than the original packaging may result in
nonwarranted damage. If returning a Keysight product for repair, attach a
complete description of failure symptoms.

Safety Symbols

Safety Symbols
The following safety symbols are used throughout this manual. Familiarize yourself
with each of the symbols and its meaning before operating this instrument.
3-2
To prevent electrical shock, disconnect instrument from mains before
cleaning. Use a dry cloth or one slightly dampened with water to clean the
external case parts. Do not attempt to clean internally.
Keep isopropyl alcohol away from heat, sparks, and flame. Store in a
tightly closed container. It is extremely flammable. In case of fire, use
alcohol foam, dry chemical, or carbon dioxide; water may be ineffective.
1
"Contacting Keysight" on page
85563-90005 Operation & Service Guide
3-1.