Service Equipment You Will Need; Tools You Will Need; Calibration Application Software - Keysight Technologies Option 503 Service Manual

Pxa signal analyzer

Table of Contents

Service Equipment You Will Need

There are certain things that will be required to troubleshoot, adjust, and test

the PXA Signal Analyzer. They include the following:

— Front End Controller Troubleshooting Kit

— USB Keyboard and Mouse

— USB Storage Device

— Test Equipment

TORX Hand Driver - Size T-8

TORX Hand Driver - Size T-10

TORX Hand Driver - Size T-20

9/16 inch nut driver

1/4 inch nut driver

5/16 inch open-end wrench

1/4 inch open-end wrench

1/4 inch socket on 4 lb torque wrench

cable puller

Calibration Application Software

Information regarding the Keysight X-Series Signal Analyzer Calibration

Application Software can be found at the following web site:

www.keysight.com/find/calibrationsoftware

N9030A PXA Signal Analyzer Service Guide

Keysight Part Number

source locally