Setting Communication Using The Foma Pc Setup Software (When Using Windows Vista) - NTT docomo FOMA SO906i User Manual

2
Select [FOMA HIGH-SPEED
3.6Mbps ] or [FOMA
click [ ].
When the system settings are optimized
The message "
the FOMA HIGH-SPEED-compatible terminal.) appears.
To cancel the settings because of some reasons such as
connecting using other than the FOMA terminal, click [
].
3
Restart the PC in accordance with the instructions
on the window.
The system settings are optimized.
Host (APN) Setting
You can set a host (APN) for packet communication.
Connect the FOMA terminal to a PC before starting this
operation.
1
Start the FOMA PC setup software and click [
(APN) ].
2
Click [OK].
The host (APN) is loaded from the FOMA terminal. Wait for
a few moments.
3
Set a host (APN).
To add a host (APN)
Click [ ].
To edit (change) a host (APN)
Select a host (APN) and click [
To delete a host (APN)
Select a host (APN) and click [
 You cannot delete a host (APN) saved as [cid1] and
[cid3]. (Even if you select [cid3] and click [
is not actually deleted. The operation is returned to
[mopera.net].)
To save data in a file
Click the [ ] menu
].
To read data from a file
Click the [ ] menu
file.
To read host (APN) data from the FOMA terminal
Click the [
].
To write host (APN) data to the FOMA terminal
Click the [
].
To create dial-up
Select a host (APN) and click [
up a dial-up connection for packet communication in
accordance with the instructions on the window.
384kbps ] and
FOMA HIGH-SPEED
" (The settings are optimized for
].
].
[ ]/[
[ ] and select a saved
] menu [FOMA
] menu [FOMA
The host (APN) is information that must be saved in the
FOMA terminal. When you use the PC with a different
FOMA terminal connected, it is required to save it again in
the new FOMA terminal.
To continue using a host (APN) saved in the PC, save the
registration number (cid) of the same host (APN) in the
FOMA terminal.
Setting Communication Using the FOMA PC
Setup Software (When Using Windows Vista)
Installing the FOMA PC Setup
Software
To use the FOMA PC setup software, install it from this
CD-ROM.
 When you install the FOMA PC setup software, be sure to
use the user account with Administrator privilege of the PC.
An error occurs when a user account without Administrator
privilege is used. For more information on Administrator
privilege, contact the manufacturer of your PC or a
representative of Microsoft Corporation.
 Confirm that the FOMA communication configuration files are
installed properly on the PC (P.5).
1
Set "FOMA SO906i CD-ROM" in the CD-ROM drive
of the PC.
2
Click [
PC setup software).
 When you click [
], it as shown below may appear. This warning appears
because of the security setting on the Internet Explorer,
however, causing no problem for use.
W h e n t h e "
" (File Download - Security Warning) window
appears
Click [
]. Set
13
] under "FOMA PC
], a warning window
].
] [
" (FOMA