Setting The Pc - NTT docomo FOMA SO706i Instruction Manual

Setting the PC

Installing the FOMA communication setting file (drivers)
d When installing FOMA communication setting file, be sure to log on as Administrator. If you attempt to
install the file with another account, an error occurs. Contact your PC's manufacturer or Microsoft for
information on how to set Administrator privileges on your PC.
d You can download the FOMA communication setting file from the DOCOMO website.
Start up Windows and insert the
1
"CD-ROM for FOMA SO706i" in the
CD-ROM drive of your PC
This screen will automatically appear.
Click "データリンクソフト・各種設定ソフト" (Setup software)
2
Click "インストール" (Install) of "FOMA通信設定ファイル （USBドライバ） "
3
(FOMA communication setting file (USB driver))
Double-click "FOMAinst.exe" in the appeared folder
4
It is displayed as "FOMAinst" depending on the setting of your PC.
Upon confirming the software license agreement, click "同意する" (Agree) to
5
agree to it
If you click " 同意しない " (Not agree), the installation is canceled.
Turn on the FOMA terminal and then connect the FOMA USB Cable with
6
Charge Function 01/02 (optional) to your FOMA terminal
After the message requesting to connect the FOMA terminal to PC appears,
7
connect the FOMA USB Cable with Charge Function 01/02 to the USB
terminal of your PC
Installing the drivers automatically starts.
After drivers are successfully installed, FOMA byte counter can be installed successively. To install FOMA
byte counter, click " インストールする（推奨）" (Install (Recommended)). Click " 完了 " (Complete) not
to install it.
Proceed to the "Checking the installed driver" (p.10) for further steps.
9