Changing The Videophone Call Setting - NTT docomo Foma D900i Manual

Changing the Videophone Call Setting

You can set the following settings for a videophone call:
Setup
発信時自画像送信
Send Self Image
*
代替画像設定
Set Alternate Image
音声自動再発信設定
Set Auto Redial by
Voice
応答保留画面選択 *
Select Answer Hold
Screen
*
通話保留画面選択
Select Call Hold
Screen
伝言メモ画面選択 *
Select Record
Message Screen
画像表示設定
Set Image Display
TV電話画面切替
Change
Videophone Screen
画像品質設定
Set Image Quality
*This function cannot be used while PIM Lock is set.
[Send Self Image]
Setting whether to send your self image
Set whether to send your self image to the other party when you make a videophone call.
• This setting is available during an outgoing call.
1
In standby, select "設定"
2
Select "1.ON" and press
Send Self Image is set.
• To cancel the setting, select "2.OFF".
N o t e
•
You can select on/off of Send Self Image from the submenu while or after entering a phone number
(see p.73).
•
The image set in the Alternate Image setting is sent to the other party while Send Self Image is off.
86
You can set whether to send your self image.
You can set an image to be sent to the other party.
When a videophone call is not connected, you can set if redial a call
by voice.
You can change the image to be sent during answer holding.
You can change the image to be sent during hold while speaking.
You can change the image to be sent during answering by Record
Message.
You can set how to display your self image and the image of the other
party.
You can change the image size during a videophone call.
You can set which is preceded, the quality or movement of an image
during a videophone call.
"TV電話"
(選択).
Description
"発信時自画像送信" from Menu.
Page
ー
p.87
p.89
p.89
p.90
p.90
p.90
p.91
p.91
[Default] ON