Before Using The Camera - NTT docomo FOMA SO906i User Manual

Before Using the Camera

You can record images using the built-in
camera, and you can send them by attaching
to i-mode mail, posting on a blog, setting for
the stand-by display, and so on.
When you save an image to the microSD
card, you can also select a mode to save a
replicated image in the FOMA terminal at the
same time (P.156, 337).
To use the microSD card, you need to obtain
a microSD card separately. If you do not have
a microSD card, you can purchase one at a
home electric appliance store or other similar
store (P.324).
 The image recorded by the camera may differ from
actual color or brightness of object.
About Using the Camera
Notes Before Using the Camera
 Clear images cannot be obtained if the camera
lens is stained with fingerprints or grease. Wipe the
camera with a soft clean cloth before recording an
image.
 Leaving the FOMA terminal in a place exposed to
direct sunlight or high temperature for a long period
of time may deteriorate the image quality.
 You cannot start the Camera mode when the battery
level is very low. To use the camera, charge the
battery sufficiently.
 When you post or send an image recorded by the
camera, it is at your own risk to decide whether
or not to share your location information attached
to the image. If you do not want to send location
information, set the Auto attach loc. info to [OFF]
(P.151).
138
Notes on Using the Camera
 To prevent shaking, hold the FOMA terminal firmly
or place it on a stable place and use the Auto timer
when recording.
 When you try to record a strong light source directly,
such as the sun or a lamp, the screen may black out
or the image on the screen may be distorted.
 The camera is manufactured based on the leading
edge technologies. Nevertheless, black and bright
points or lines may appear constantly in the display.
Additionally, increased noise may appear as white
lines when recording in a low-light environment.
These are not malfunctions.
 When the battery level becomes very low in the
Camera mode, the Camera mode is terminated.
About the Camera Mode
To use the camera, press the shutter
over a second in the stand-by display. The
Camera mode is activated, image through the
camera lens appears in the display, and the
photo light is turned on (low light).
To terminate the Camera mode, press
 You can also activate the Camera mode by pressing
for over a second in the stand-by display.
The Camera mode is terminated automatically if
the keypad is not pressed for about two minutes.
for
.