Changing The Standby Display - NTT docomo FOMA D703i User Manual

3
Select each item to set
Vibrate alert
Keypad sound
Call alert volume
Mail alert volume
Low Battery Alert
Alarm sound
Schedule sound
i- α ppli sound
Sensitize microphone ：Sets whether to sensitize the microphone.
Displays/Lights Settings

Changing the standby display

You can change the standby display to your favorite image.
･
If you set video/i-motion, Chara-den or i-
set to Yes, displaying in ticker is canceled. After that, if you set other than the video/i-motion, Chara-den and
ppli standby display, Show ticker in i-Channel Ticker is reset to Yes. ☛P183
i-
α
Setting the clock display ☛P123
･
Setting images, video/i-motion or Chara-den as the standby display
Images, i-motion and Chara-den set by default ☛P347, P350
･
Default use Style Theme setting
m8211
1
1, 3 or 4
2
108 Sounds/Displays/Lights Settings
z Press p
：Sets whether to operate the vibrator for incoming calls or mails, etc.
･
When ON is set, an incoming call or mail is informed by vibration according to
Vibrator Setting (☛P105). Note that when OFF is set in Vibrator Setting, the
vibrator operates in Pattern A.
：Sets the keypad sound.
：Sets the ring volume for incoming calls.
：Sets the ring volume for incoming mails.
：Sets whether to sound an alarm when the battery becomes low.
：Sets whether to sound the alarm clock and timer alarm.
･
When ON is set, the alarm clock sounds according to the setting of Alarm Clock and
the timer alarm sounds by
volume set in Call alert volume of this function.
：Sets whether to sound a schedule alarm.
･
When ON is set, it sounds according to the setting of the schedule and the volume
of schedule reminder.
：Sets whether to generate the i-
･
When ON is set, it sounds according to the volume of i-
ppli for the standby display when Show ticker in i-Channel Ticker is
α
アラーム・メロディ
(Alarm, melody) at the call alert
ppli sound.
α
ppli effect sound.
α
Standby Display Setting