Replacing A Riser Card - Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

Expansion cards and backup units
Concluding steps
▶
"Installing the fan cage" on page
▶
"Reassembling" on page
▶ If applicable, connect external cables to the expansion card.
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
▶
"Enabling replaced components in the BIOS" on page
▶
"Updating expansion card firmware" on page
▶
"Resuming BitLocker functionality" on page
9.7.4

Replacing a riser card

Field Replaceable Unit
(FRU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Locating the defective server" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Removing the fan cage" on page
▶
"Locating the defective component" on page
278
76.
60.
65.
69.
52.
74.
Upgrade and Maintenance Manual
100.
95.
105.
Hardware: 5 minutes
49.
53.
56.
50.
69.
52.
RX2540 M6