Basic hardware procedures
4.5
Replacing the riser card
Figure 7: Replacing the riser card
The riser module consists of the riser metal bracket and the riser card.
The riser card is connected to the riser metal bracket with two rivets:
– Rivet (1).
– Rivet with bolt (2).
Ê For removing the riser card loosen the two rivets and take off the riser card.
Ê For installing the new riser card put the riser card on the riser metal bracket
and fasten the two screws with a hexagonal SW6.
Upgrade and Maintenance Manual
45
CX2550 M2