Installing A Dummy Cover; Concluding Steps - Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual

6.3.4

Installing a dummy cover

Figure 41: Installing a dummy cover
Ê Insert the dummy cover into the empty bay with the impressed arrow symbol
facing up (see circle).
Ê Press in on both release latches on the dummy cover until it locks in place.
V
CAUTION!
Always install dummy covers into unused bays to comply with
applicable EMC regulations and satisfy cooling requirements.
6.3.5

Concluding steps

"Connecting the power cord" on page 79
Ê
RX2540 M2
Upgrade and Maintenance Manual
Power supply unit (PSU)
139