Installing A Dummy Cover; Concluding Steps - Fujitsu PRIMERGY RX2540 M1 Upgrade And Maintenance Manual

Power supply units
6.3.3

Installing a dummy cover

Figure 18: Installing a dummy cover
Ê Insert the dummy cover into the empty bay with the impressed arrow symbol
facing up (see circle).
Ê Press in on both release latches on the dummy cover until it locks in place.
V
CAUTION!
Always install dummy covers into unused bays to comply with
applicable EMC regulations and satisfy cooling requirements.
6.3.4

Concluding steps

"Connecting the server to the power source" on page 66
Ê
108 Upgrade and Maintenance Manual
RX2540 M1